| Series | 1501 Series | Pin Header |
| Pitch | 1.5mm | |
| Number of Positions | 2P to 16P | (Implied from DIM.A/B/C table) |
| Rated Voltage | 250V AC/DC | |
| Rated Current | 2A AC/DC | |
| Contact Resistance | 20 m | |
| Insulation Resistance | 1000M | (Initial), 100M (Humidity Test) |
| Dielectric Strength | 500V AC/minute | |
| Operating Temperature | -25 ~ +85 | |
| Applicable PCB Thickness | 1.2mm ~ 1.6mm | |
| Mechanical Performance: Pin Retention Force | 10N per pin | |
| Mechanical Performance: Terminal Retention Force | 10N per pin | |
| Mechanical Performance: Plug-in Force | 3N per pin | |
| Mechanical Performance: Plug-out Force | 0.5N per pin | |
| Endurance: Soldering Rest | Time: 2.50.5S, Temperature: 2605, Area: 95% | |
| Endurance: Resistance to Soldering Heat | Time: 51S, Temperature: 2605 | Appearance: No Damage |
| Endurance: Heat Test | Time: 96h, Temperature: +853 | Appearance: No Damage, Contact Resistance: 20 m |
| Endurance: Cold Test | Time: 48h, Temperature: -253 | Appearance: No Damage, Contact Resistance: 20 m |
| Endurance: Temperature Cycling | 5 cycles (-253 to +853) | Appearance: No Damage, Contact Resistance: 20 m |
| Endurance: Constant Humidity | Time: 96h, Temperature: 602, RH: 90%-96% | Appearance: No Damage, Contact Resistance: 20 m, Insulation Resistance: 100M |
| Endurance: Salt Spray | Time: 162h, Concentration: 51% NaCl, Temperature: 352 | Appearance: No Damage, Contact Resistance: 20 m |
| Material: Terminal (Contact) | Phosphor bronze, Thickness: 0.15mm or 0.30mm | Tin Plating: 3~4m or Gold Plating: 3~4m |
| Material: Housing (e.g., Opening Wafer) | Nylon46 (UL94V-0) | Color: Beige |
| Material: Housing (e.g., Lips Wafer) | PBT (UL94V-0) | Color: White |
| Material: Housing (e.g., Tiepian Wafer) | Nylon46 (UL94V-0) | Color: Beige |
| Material: Solder tabs | Phosphor bronze, Thickness: 0.25mm | Tin Plating: 3~4m |
