| Contact Type | Low-Frequency Signal Contacts, T-Contact, Coax Contacts |
| Current Rating (Standard Signal Contact) | 2.6A @ 85C (per contact, all loaded), 3.3A @ 25C (per contact, one loaded) |
| Current Rating (T-Contact) | 3.5A @ 25C (per contact, all loaded), 8.5A @ 25C (per contact, one loaded) |
| Current Rating (Flex Circuit Assembly) | 1.0A max (per individual track @ 25C) |
| Working Voltage | 800V DC or AC peak (Others), 300V DC or AC peak (Pre-Cabled & Cable Assemblies) |
| Voltage Proof | 1,200V DC or AC peak |
| Contact Resistance | 20m max (Initial), 25m max (After Conditioning) |
| Insulation Resistance | 1,000M min (Initial), 100M min (Hot After Conditioning) |
| Environmental Classification | 55/125/56 |
| Operating Temperature Range | -55C to +125C |
| Low Air Pressure Severity | 300 mbar (9,144m/30,000ft) up to 360V DC |
| Salt Spray | BS2011 Part 2.1Kb Severity 2 (L-Tek), EIA364 Test Procedure 26 condition A (J-Tek & Mix-Tek) |
| Vibration Severity (Standard Signal Contact) | 10Hz to 2,000Hz, 0.75mm, 98m/s (10G) for 6 hours; 10Hz to 2,000Hz, 196.2m/s (20G) for 2 hours |
| Shock Severity | 981m/s (100G) |
| Bump Severity | 390m/s (40G), 4,00010 bumps |
| Clip Retention in Body | 18N min |
| Contact Retention in Housing | 10N min |
| Durability (Standard Signal Contact) | 500 operations |
| Durability (T-Contact) | 1,000 operations |
| Insertion Force (per contact) | 1.0N max (M83 Signal), 2.0N max (M80 Standard Signal), 4.0N max (T-Contact) |
| Withdrawal Force (per contact) | 0.2N min (M80 Standard Signal & M83 Signal), 0.5N min (T-Contact) |
| Wire Termination Range | See Component Specification C049XX (latest issue) |
| Coax Impedance | 50 |
| Coax Frequency Range | 6GHz |
| Coax VSWR | 1.19 + (0.04 x Freq) GHz max (M80-310), 1.05 + (0.04 x Freq) GHz max (Others) |
| Coax Voltage Rating | 180V AC at 500mA |
