Home > Coaxial Connectors >

hanxia HX IPEX 1.0-4P

Product Categories

FFC FPC Connector [3000]
Memory Connectors [449]
Power Connectors [1360]
Heavy Duty Connectors [675]
Rectangular Connectors [2995]
Terminal Connectors [939]
D Sub Connectors [2053]
USB DVI HDMI Connectors [2081]
Backplane Connector [407]
Lighting Connectors [310]
Centronics Connectors [197]
Coaxial Connectors [1032]
Shunts, Jumpers [111]
Fiber Optic Connectors [176]
Photovoltaic Connectors [34]
Banana Bullet Connector [239]
Transistor Socket [377]
Sleeve Connector [848]
Pluggable Connector Accessories [113]
Arrays, Edge Type, Mezzanine (Board to Board) [324]
Between Series Adapters [26]
Rectangular Connector Adapters [21]
IC Sockets [86]
Barrel, Bullet Connectors [5]
Terminal Adapters [1]
USB, DVI, HDMI Connector Accessories [35]
D-Sub Connector [358]
Connector Adapter Kits [12]
Audio Connectors [204]
Contacts, Spring Loaded (Pogo Pins), and Pressure [18]
Plugs and Receptacles [79]
Power Entry Modules (PEM) [45]
Pluggable Connector Assemblies [93]
Barrier Blocks [73]
ARINC [3]
Terminal Strips and Turret Boards [1]
Backplane Connector Accessories [15]
Patchbay, Jack Panel Accessories [54]
Backshells and Cable Clamps [89]
Circular Connector Accessories [401]
Coaxial Connector (RF) Accessories [41]
Coaxial Connector (RF) Adapters [415]
Coaxial Connector (RF) Assemblies [965]
D-Sub, D-Shaped Connector Housings [64]
FFC, FPC (Flat Flexible) Connector Accessories [1]
FFC, FPC (Flat Flexible) Connector Assemblies [2373]
Heavy Duty Connector Accessories [98]
Heavy Duty Connector Assemblies [2]
Heavy Duty Connector Frames [13]
Heavy Duty Connector Housings, Hoods, Bases [125]
Heavy Duty Connector Inserts, Modules [3]
Inline Module Sockets [28]
Memory Connector Accessories [3]
PC Card Sockets [485]
Modular/Ethernet Connector Jacks With Magnetics [51]
Photovoltaic (Solar Panel) Connector Assemblies [68]
Solid State Lighting Connector Accessories [7]
Blade Type Power Connector Accessories [79]
Blade Type Power Connector Assemblies [110]
Multi Purpose [215]
Power Entry Connector Accessories [1]
USB, DVI, HDMI Connector Adapters [348]
Circular Connector Assemblies [972]
Heavy Duty Connector Contacts [135]
Circular Connector Adapters [95]
Board In, Direct Wire to Board [14]
Free Hanging, Panel Mount [550]
USB, DVI, HDMI Connector Assemblies [1172]
Backplane Connector Housings [30]
Blade Type Power Connector Housings [116]
Board Spacers, Stackers (Board to Board) [103]
Card Edge Connector Accessories [1]
Headers, Male Pins [2649]
Fiber Optic Connector Accessories [57]
Fiber Optic Connector Adapters [263]
FFC, FPC (Flat Flexible) Connector Housings [314]
Specialized Connectors [102]
Coaxial Connector (RF) Contacts [20]
Ring Connectors [280]
FFC, FPC (Flat Flexible) Connector Contacts [2]
Solid State Lighting Connector Assemblies [18]
Solid State Lighting Connector Contacts [2]
Lugs [18]
Spade Connectors [97]
Housings, Boots [16]
Knife Connectors [3]
D-Sub, D-Shaped Connector Accessories [14]
D-Sub, D-Shaped Connector Jackscrews [21]
Fiber Optic Connector Assemblies [245]
Keystone Connector Accessories [3]
Keystone Faceplates, Frames [6]
Keystone Inserts [116]
Modular/Ethernet Connector Adapters [54]
Modular/Ethernet Connector Jacks [415]
Modular/Ethernet Connector Plug Housings [18]
Modular/Ethernet Connector Wiring Blocks [3]
Din Rail, Channel [3]
Barrel Connector Adapters [1]
Terminal Block Accessories [4]
Rectangular Connector Contacts [333]
Rectangular Connector Housings [1354]
Specialized Terminal Blocks [30]
Terminal Block Adapters [2]
Rectangular Connector Accessories [170]
Hard Metric, Standard [102]
DIN 41612 [122]
Panel Mount [8]
Terminal Block Jumpers [1]
Blade Type Power Connector Contacts [53]
Magnetic Wire Connectors [14]
PC Pin Receptacles, Socket Connectors [37]
PC Pin, Single Post Connectors [16]
Spring Loaded [21]
Quick Connects, Quick Disconnect Connectors [129]
Wire Pin Connectors [15]
Screw Connectors [44]
Jacks, Plugs [10]
Headers, Plugs and Sockets [1891]
Power Distribution [45]
Terminal Block Wire Ferrules [41]
Wire to Board [452]
Coaxial Connector (RF) Terminators [61]
Headers, Specialty Pin [1]
Interface Modules [3]
D-Sub, D-Shaped Connector Adapters [5]
Banana and Tip Connector Adapters [136]
Wire Splice Connectors [73]
Headers, Receptacles, Female Sockets [1311]
Terminal Accessories [1]
Card Edge Connector Housings [1]
Edgeboard Connectors [92]
D-Sub, D-Shaped Connector Backshells, Hoods [290]
D-Sub, D-Shaped Connector Contacts [13]
Modular/Ethernet Connector Plugs [1]
Backplane Connector Contacts [7]
Circular Connector Contacts [77]
Circular Connector Housings [237]

Shenzhen ECER Network Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

hanxia HX IPEX 1.0-4P

Name: hanxia HX IPEX 104P
Brand: HX IPEX 1.0-4P
Price: 1 USD

Interface : Male Pin

Interface Diameter : 2mm

Connector Type : Board Side

Description : Connector Receptacle IPEX Male Pin 500Ω Surface Mount

Stock : 20000

Frequency : 6GHz

Packaging Details : SMD

Delivery Time : 5-9工作日

MOQ : 5000

Impedance : 50Ω

Operating Temperature : -40℃~+90℃

Model Number : HX IPEX 1.0-4P

Brand Name : HX IPEX 1.0-4P

Number of Ports : 1

RF Series : IPEX

Contact Now

Product Overview

This document outlines the specifications for the HX IPEX 1.0-4P antenna seat manufactured by Shenzhen Hanxia Electronic Co., Ltd. It details the requirements for operating environment, storage, ratings, and various performance tests to ensure product quality and reliability.

Application Condition:

Operating Environment: Temperature: -40C to +90C, Relative Humidity: 25%~85%, without loss of function.
Storage Environment: Temperature: -55C to +100C, Relative Humidity: 95% or Less, without loss of function.

Ratings:

Voltage Rating: 60VAC
Nominal Characteristic Impedance: 50
Frequency: DC0.1~6GHz

Health, Safety and Environment:

All hazardous substances contained in this product should comply with the regulations specified by SGS.

Test Description:

The product performance must meet the specifications in section 3.4. Unless otherwise specified, all tests and measurements are to be performed under the following conditions: Temperature: 15~35, Humidity: 45% ~ 75%.

Brand

Shenzhen Hanxia Electronic Co., Ltd

Product Name

Antenna Seat

Part Number

HX IPEX 1.0-4P

Manufacturer

Shenzhen Hanxia Electronic Co., Ltd

Contact Person

Huang Bin, Zhang Wei, Luo Xiaochun

Tel

0755-33819206

Fax

0755-27597491

Item	Requirements	Test Methods
Product Appearance	All components shall be properly assembled and free of burrs, warps, scratches, broken chips, and other abnormalities. Comply with method EIA 364-18B. Visual, functional, and dimensional inspection complies with applicable specification and document.	Visual Examination
Low Level Contact Resistance	Initial: 20m Max. Final: 70m Max.
Insulation Resistance	Initial: 500 M Min. Final: 100 M Min. Comply with method EIA-364-21D. Insulation resistance is measured between adjacent contacts after applying 100V DC for 1 minute.
Dielectric Withstanding Voltage	No evidence of breakdown or flash burn. No burn caused by short circuit. No insulation destruction. Current leakage: 0.50 mA Max. Comply with method EIA-364-20D, Test Method B. Apply 300V AC for 1 minute at sea level on tested plug and connectors.
VSWR	Plug: 1.3 Max. (DC0.1~3GHz), 1.5 Max. (3~6GHz). Receptacle: 1.3 Max. (DC0.1~3GHz), 1.4 Max. (3~6GHz). Measure the VSWR as shown by the network analyzer. Frequency: 100M~6GHz.
Un-mating force	Total un-mate force: Initial 5N Min. after 30 cycles 3N Min. Un-mate the receptacle connector (soldered to the test board) and plug at a speed of 253mm/minutes along the mating by the push-on/pull-off machine.
Crimp strength	5N MIN. Pull the cable as shown at a speed of 253mm/minutes by tensile strength machine.
Durability	Contact resistance of inner contact: Initial 20m Max., after testing 40m Max. Contact resistance of ground contact: Initial 20m Max., after testing 40m Max. No abnormality. Mate and un-mate the receptacle connector (soldered to the test board) and plug 30 cycles at a speed of 253mm/minutes. Comply with method EIA 364-09C.
Cable retention force	Appearance: Looseness between the parts, chipping, breakage or other abnormality shall not occur. Electrical discontinuity: No electrical discontinuity greater than 1 micro-sec. shall occur. Contact resistance of inner contact: Initial 20m Max., after testing 40m Max. Contact resistance of ground contact: Initial 20m Max., after testing 40m Max. Apply force on the cable as shown. During the testing, run 100mA DC to check electrical discontinuity.
Vibration	Appearance: No abnormality. Electrical discontinuity: No electrical discontinuity greater than 1 micro-sec. shall occur. Contact resistance of inner contact: Initial 20m Max., after testing 40m Max. Contact resistance of ground contact: Initial 20m Max., after testing 40m Max. Apply the following vibration to the mating connector. Frequency: 10Hz-100Hz-10Hz/approx 20 minutes. Half amplitude, peak value of acceleration: 1.5mm or 59m/s(6G). Directions, cycle: 3 mutually perpendicular directions, 3 cycles for each direction. During the testing, run 100mA DC. Comply with method EIA 364-28E.
Physical shock	Appearance: Looseness between the parts, chipping, breakage or other abnormality shall not occur. Electrical discontinuity: No electrical discontinuity greater than 1 micro-sec. shall occur. Contact resistance of inner contact: Initial 20m Max., after testing 40m Max. Contact resistance of ground contact: Initial 20m Max., after testing 40m Max. Apply the following vibration to the mating connector in accordance with MIL-STD-202, Method 213, Condition B. Peak value of acceleration: 735m/s(75G). Duration: 11msec. Wave Form: half sinusoidal. Directions, cycle: 6 mutually perpendicular, 3 cycles about each direction. During the testing, run 100mA DC to check electrical discontinuity. Comply with method EIA 364-27B.
Humidity	Appearance: Looseness between the parts, chipping, breakage or other abnormality shall not occur. Contact resistance of inner contact: Initial 20m Max., after testing 40m Max. Contact resistance of ground contact: Initial 20m Max., after testing 40m Max. Insulation resistance: Initial 500M Min., after testing 100M Min. D.W. Voltage: No creeping discharge, flashover, nor insulator breakdown shall occur. Apply the following environment to the mating connector in accordance with Temperature: 313+/-2K(40+/-2C), Humidity: 90~95%RH, Duration: 96 hours. Comply with method EIA 364-31C, Method II, Condition A.
Thermal shock	Appearance: Looseness between the parts, chipping, breakage or other abnormality shall not occur. Contact resistance of inner contact: Initial 20m Max., after testing 40m Max. Contact resistance of ground contact: Initial 20m Max., after testing 40m Max. Insulation resistance: Initial 500M Min., after testing 100M Min. D.W. Voltage: No creeping discharge, flashover, nor insulator breakdown shall occur. Apply the following environment to the mating connector. Temperature: 218K(-55C) for 30 min. <-> 358K(85C) for 30 min. Transition time: Max. 5 min. Number of cycles: 5 cycles. Comply with method EIA 364-32E.
Temperature Life	Appearance: Looseness between the parts, chipping, breakage or other abnormality shall not occur. Contact resistance of inner contact: Initial 20m Max., after testing 40m Max. Contact resistance of ground contact: Initial 20m Max., after testing 40m Max. Insulation resistance: Initial 500M Min., after testing 100M Min. D.W. Voltage: No creeping discharge, flashover, nor insulator breakdown shall occur. Apply the following environment to the mating connector. Temperature: 313+/-2K(40+/-2C), Relative Humidity: 80+/-5%RH, Gas: H2S 3+/-1ppm, Duration: 96 hours.
H2S Gas	Appearance: No abnormality adversely affecting the performance shall occur. Contact resistance of inner contact: Initial 20m Max., after testing 40m Max. Contact resistance of ground contact: Initial 20m Max., after testing 40m Max. Apply the following environment to the mating connector in accordance with MIL-STD-202, Method 101 Condition B. Temperature: 308+/-2K(35+/-2C), Humidity: 90~95%RH, Duration: 96 hours.
Salt Spray	Appearance: No abnormality adversely affecting the performance shall occur. Contact resistance of inner contact: Initial 20m Max., after testing 40m Max. Contact resistance of ground contact: Initial 20m Max., after testing 40m Max. Apply the following environment to the mating connector in accordance with MIL-STD-202, Method 101, Condition B. Temperature: 308+/-2K(35+/-2C), Salt water density by weight: 5+/-1%, Duration: 48 hours. Comply with method EIA 364-26B, Method 101, Condition B.
Solder ability	The number of reflow times is 2 within the profile.

hanxia HX IPEX 1.0-4P Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen ECER Network Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!