| Contact Resistance | FPC/FFC Biir: 20mV MAX, 10mA | < 20 m |
| Insulation Resistance | FPC/FFC #46: 500V DC | 500M MIN |
| Dielectric Strength | FPC/FFC #46: 200V AC for 1 minute | No Breakdown |
| Locking and Withdrawal Force | FFC AR 25 3mm/minute | Insertion: 1.96*n (N) MAX, Withdrawal: 0.49*n (N) MIN |
| Terminal Retention Force | 25 3mm/minute | 392N MIN |
| Repeated Insertion and Withdrawal | Actuator up to 20 cycles at < 10 cycles/minute | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 C MAX |
| Vibration | 10-55-10Hz/min, Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz in 1 minute, Duration: 2 hours in each X,Y,Z axes | Contact Resistance: 60 m MAX, Discontinuity: 1 ms MAX. |
| Shock | 490m/s {50G}, 3 strokes in each X,Y,Z axes. | Appearance: No Damage, Discontinuity: 1 ms MAX. |
| Heat Resistance | 852C, 96 hour | Contact Resistance: 60 m MAX |
| Cold Resistance | -402C, 96 hour | Contact Resistance: 60 m MAX |
| Humidity Resistance | Temperature: 402C, Relative Humidity: 90-95%, Duration: 96 Hours | Contact Resistance: 60 m MAX, Dielectric Strength: Must meet 4.1.3, Insulation Resistance: 20M MIN |
| Temperature Cycling | 5 cycles of: a)-553C 30 minutes, b) 852C 30 minutes | Contact Resistance: 60 m MAX |
| Salt Spray | 48 * 4 hours exposure to a salt spray from the 51% solution at 352C. | Contact Resistance: 60m MAX |
| SO2 Gas | 24 hours exposure to 50 5ppm. SO2 gas at 402C. | Contact Resistance: 60 m MAX |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution | Contact Resistance: 60 m MAX |
| Solder ability | Soldering Time: 20.5 sec. Soldering Temperature: 2455C, 0.2 mm from terminal tip | Solder Wetting: 95%LL |
| Resistance to Soldering heat | Soldering Time: 305 sec. Soldering Temperature: 2455C | Appearance: No Damage |
