| Operating Temperature Range | | -35C TO +85C (NOTE 1) |
| Storage Temperature Range | | -10C TO +60C (NOTE 3) |
| Operating Humidity Range | | 40 % TO 80 % (NOTE 2) |
| Storage Humidity Range | | 40 % TO 70 % (NOTE 3) |
| Withstanding Voltage | | 150 VAC (DC) |
| General Examination | VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING. | |
| Marking | VISUALLY CONFIRMED. | |
| Contact Resistance | 20 mV MAX, 1mA (DC OR 1000 Hz) | 30 m MAX. |
| Insulation Resistance | 100 V DC. | 500 M MIN. |
| Voltage Proof | 500 V AC FOR 1 min. | NO FLASHOVER OR BREAKDOWN. |
| Durability (Insertions/Extractions) | 50 TIMES | 1) CONTACT RESISTANCE: 30 m MAX.
2) NO DAMAGE, CRACK OR LOOSENESS OF PARTS. |
| Vibration | 10 TO 55 Hz, SINGLE AMPLITUDE 0.75 mm, AT 2 h, FOR 3 DIRECTIONS. | 1) NO ELECTRICAL DISCONTINUITY OF 1s.
2) NO DAMAGE, CRACK OR LOOSENESS OF PARTS. |
| Shock | 490 m/s DURATION OF PULSE 11 ms AT 3 TIMES FOR 3 DIRECTIONS. | NO DAMAGE, CRACK OR LOOSENESS OF PARTS. |
| Rapid Change of Temperature | -555 TO 35+855 TO 35C
TIME 3010 TO 153010 TO 15 min.
UNDER 5 CYCLES. | 1) CONTACT RESISTANCE: 30m MAX.
2) INSULATION RESISTANCE: 500 M MIN.
3) NO DAMAGE, CRACK OR LOOSENESS OF PARTS. |
| Exposure | EXPOSED AT 402 C, 90 ~ 95 %, 96 h. | NO DAMAGE, CRACK OR LOOSENESS OF PARTS. |
| Reflow Soldering | MAX 250C WITHIN 10 sec
MIN 230C WITHIN 60 sec
PREHEATING AREA: 170C TO 180C 60 sec TO 120 sec
PUT THROUGH IN REFLOW FURNACE TWICE.
LEAVE IN AMBIENT TEMPERATURE AND HUMIDITY FOR 1 HOUR.
CONNECTOR TEMPERATURE TO BE AMBIENT FOR SECOND REFLOW. | NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF THE TERMINALS. |
| Manual Soldering | SOLDERING IRON TEMPERATURE 3505 C, FOR 51 sec. | NO STRENGTH ON CONTACT. |
| Solderability | SOLDERING TEMPERATURE : 2455C
DURATION OF IMMERSION : 3sec. | A NEW UNIFORM COATING OF SOLDER SHALL COVER MINIMUM OF 95 % OF THE SURFACE BEING IMMERSED. |
