OMRON XG4A-1431

OMRON XG4 Series Flat Cable Connectors

The OMRON XG4 series offers mainstream circuit board connectors conforming to MIL Standards with improved design. These connectors are designed for high-density mounting and offer features like MIL-compliant cables for faster delivery and lower costs. The 2.54-mm pitch simplifies pattern-making. Applicable for discrete wire connections and relaying.

Key Features:

• Recommended for high-density mounting.
• MIL-compliant cable ensures faster delivery times and lower cost.
• 2.54-mm pitch simplifies pattern-making.
• Space-saving Box-type Plugs (XG4C) available.
• IDC Plugs (XG4E) can be used for relaying.
• Conform to MIL standards (MIL-C-83503).
• Lock levers available for certain plug types.

Application Scenarios:

Suitable for various electronic interconnection needs where MIL standards and high-density, reliable connections are required.

Precautions

Correct Use

• Mounting: Be sure to anchor the board with screws before mounting. Note that a Polarizing Key cannot be mounted on the lower Plug.
• Connecting the Socket: Before connecting the XG4M with Strain Relief, remove as much slack from the cable as possible. Insert as shown in manual. Attach the Semi-cover before connecting the XG5M-N. It is not possible to use the Hood Cover.
• Lock Lever Operation: Do not force the lock lever past its movable range. Do not use any type of tool to operate the lock lever; operate it only with your hand. Always release the lock mechanism before disconnecting the connector from the socket.
• Soldering: Automated Soldering Conditions (Jet Flow): Soldering temperature: 250 5C, Continuous soldering time: Within 51 s. Solder-mount the XG4A with the lock levers fully closed or fully open.
• Storage: If lock levers are left at an intermediate position for a long time, they may become loose. Store plugs with lock levers fully closed or fully open when not in use.