Sign In | Join Free | My infospaceinc.com
China Shenzhen ECER Network Technology Co., Ltd. logo
Shenzhen ECER Network Technology Co., Ltd.
Verified Supplier

1 Years

Home > Memory Connectors >

SHETIME TFC6A-N1S1-2000-A

Product Categories
Shenzhen ECER Network Technology Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

SHETIME TFC6A-N1S1-2000-A

Packaging Details : SMD

Model Number : TFC6A-N1S1-2000-A

MOQ : 1000

Delivery Time : 3-5工作日

Card Type : MicroSD Card

Card Connection Mode : Push-Push

Height Above Board : 1.8mm

Description : Push-Push 1.8mm MicroSD Card SMD PC Card Sockets RoHS

Brand Name : TFC6A-N1S1-2000-A

Stock : 100000

Contact Now

Product Overview

This product specification defines the product performance and the test methods to ascertain the performance of the T-FLASH, which is designed and manufactured by Company. This product is a TF card connector designed for surface mounting.

BrandNot Specified
OriginTAIWAN FACTORY: , CHINA FACTORY:
MaterialFollows RoHS requirements.
ColorNot Specified
CertificationsUL498
Package TypesTray or carrier tape, as specified in purchase order.
Part NumberTFC6A-N1S1-2000-A
DescriptionTF6A (TF Card Flush Mount 6A)
ManufacturerDONGGUAN GAOYUEDA ELECTRONICS COLTD

Technical Specifications

ItemRequirementsTest Methods
Confirmation of ProductProduct shall be conforming to the requirements of applicable product drawing.Visually, dimensions and functionally inspected per applicable product drawing.
Contact resistance (Low Level)80 m Max. initialSubject mated contacts assembled in housing to closed circuit of 10 mA max. at open circuit voltage of 20 mV max.
Insulation resistance1000 M Min.Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. MIL-STD-202, Method 302, Condition B (500 V DC10%).
Dielectric StrengthConnector must withstand test potential of 500 V AC for 1 minute. Current leakage must be 1.0 mA max..Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. MIL-STD-202, Method 301.
Durability (Repeated Mating/Unmating)Contact Resistance: 100 m Max. after testingMate and unmate connector for 5000 cycles.
Temperature rise30C Max.Not Specified

Environmental Requirements

SectionDescription
SOLDERABILITYConnectors solderability can meet MIL-STD-202F standard. Finish shall be free of contaminants.
RESISTANCE TO SOLDER HEAT - Wave SolderingConsists of three consecutive phases: Preheat (Increase in temperature not to exceed 4 per second. Final preheat temperature will be within 125 of solder temperature.), Soldering (Device leads will be exposed to solder wave at 250 for a maximum of 5 seconds.), Cool Down (Cool down in ambient air at approximately 20 to 25).
RESISTANCE TO SOLDER HEAT - INFRARED REFLOWThree cycles. Each cycle consisting of three consecutive phased: Preheat (Increase in temperature not to exceed 4 per second.), Soldering (Maximum allowable time above reflow temperature of 183 is 90 seconds. Maximum temperature in this interval is 260, not to exceed 10 seconds.), Cool Down (Cool down shall not exceed 6 per second.). Device temperature measurements are referenced from the top-center of the package outer surface.
CLEANINGConnectors resist to cleaning process. Aqueous Cleaning: Three cycles; each cycle consisting of a maximum of one minute exposure to 54 to 66 demineralized tap water at a maximum pressure of 30 psi; followed by air drying for 60 to 90 seconds at 93 to 121.

Quality SHETIME TFC6A-N1S1-2000-A for sale

SHETIME TFC6A-N1S1-2000-A Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Shenzhen ECER Network Technology Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)