| Material Details |
| Plastic Part | LCP UL94V-0 |
| Contact Terminal Part | C5191R-H, Nickel base, Gold plated contact area 1 |
| Shell Part | C2680R-H, Nickel plated base 50, Nickel plated 80 |
| Working Conditions |
| Working Voltage | 30VAC RMS Max |
| Working Current | 1.0 Ampere |
| Operating Temperature | -30+80 |
| Electrical Performance |
| Test Item | Specification & Standard | Test Method & Reference Standard | Value |
| Contact Resistance | 50m MAX | Measure impedance at contact area with low power current. Ref: EIA 364-23A | - |
| Insulation Resistance | 100M MIN | Measure impedance between adjacent contact pins. Ref: EIA 364-21A | - |
| Withstand Voltage Test | 100V DC / 100V AC 1 minute 0.5mA | Test high voltage between contact pins. Ref: EIA 364-20A | - |
| Mechanical Performance |
| Insertion Force | 3.57kgf MAX | When matching with wire terminal, insertion speed 25mm/min. Ref: EIA 364-13A | - |
| Extraction Force | 1.00kgf MIN | When matching with wire terminal, extraction speed 25mm/min. Ref: EIA 364-13A | - |
| Terminal Single PIN Retention Force | 0.3 kgf MIN | Contact PIN retracting force from plastic at 25mm/min. | - |
| Durability Test | 3000 cycles | Plug and unplug at a uniform speed of 600 cycles per hour. Ref: EIA 364-09A | - |
| Vibration Test | Amplitude 1.5mm, 10Hz-55Hz-10Hz cycle for 2 hours in X/Y/Z directions | Frequency 10Hz to 55Hz per minute, continuous test. Ref: EIA 364-28A | - |
| Environmental Performance |
| Solderability | Tin dipping area >95% | Product welding area immersed in 2355 tin bath for 50.5 seconds. Ref: MIL STD-202F | - |
| High Temperature Resistance | Appearance without obvious damage, Contact Resistance 100m MAX, Insulation Resistance 100M MIN | Product placed in 85 oven for 96 hours, then at room temperature for 3 hours. Ref: MIL STD-1344A | - |
| Low Temperature Resistance | Appearance without obvious damage, Contact Resistance 100m MAX, Insulation Resistance 100M MIN | Product placed in -40 oven for 96 hours, then at room temperature for 3 hours. Ref: MIL STD-1344A | - |
| Humidity Resistance | Appearance without obvious damage, Contact Resistance 100m MAX, Insulation Resistance 100M MIN | Product placed in 402, 9095%RH environment for 120 hours. Ref: EIA 364-31A | - |
| Corrosion Resistance | Appearance without obvious corrosion, Contact Resistance 50m MAX | Product placed in salt spray chamber with 5% salt concentration, 352 for 12 hours, then at room temperature for 1 hour. Ref: EIA 364-26A | - |
| Solderability (Reflow) | Appearance without obvious discoloration/bubbling; Solder foot wetting smooth | Recommended reflow curve: (details omitted as not fully specified) | - |
