| Operating Temperature Range | Standard Operation | -40C to +85C (Note 1) | Visually and by measuring instrument. |
| Storage Temperature Range | Standard Storage | -10C to +60C (Note 2) | Visually confirmed. |
| Operating Humidity Range | Standard Operation | 40% to 80% (Note 3) | |
| Storage Humidity Range | Standard Storage | 40% to 70% (Note 2) | |
| Voltage Rating | | 30V AC | |
| Current Rating | AWGH22 - 2A | 2A | |
| Current Rating | AWGH24-28 - 1A | 1A | |
| Current Rating | AWGH#30 - 0.5A | 0.5A | |
| Current Rating | AWG#30 | 0.5A | |
| Contact Resistance | 100mA (DC or 1000 Hz) | 30m MAX. | According to drawing. |
| Insulation Resistance | 500V DC | 1000M MIN. | According to drawing. |
| Voltage Proof | 650V AC for 1 min | No flashover or breakdown. | According to drawing. |
| Mechanical Characteristics (Insertion/Extraction) | 30 times | Contact Resistance: 30m MAX. | |
| Mechanical Characteristics (Vibration) | 10 to 55 Hz, single amplitude 0.75 mm, at 2h, for 3 directions | No electrical discontinuity of 1s. No damage, crack or looseness of parts. | |
| Mechanical Characteristics (Shock) | 490 m/s, duration of pulse 11 ms at 3 times, for 3 directions | No electrical discontinuity of 1s. No damage, crack or looseness of parts. | |
| Environmental Characteristics (Damp Heat) | 40 2C, 90 to 95 %, 96 h (steady state) | Insulation Resistance: 1000M MIN. Contact Resistance: 30m MAX. No damage, crack or looseness of parts. | |
| Environmental Characteristics (Rapid Change of Temperature) | -55 to +85C (30 min max transition time) under 5 cycles | Contact Resistance: 30m MAX. Insulation Resistance: 500M MIN. No damage, crack or looseness of parts. | |
| Resistance to Automatic Soldering (Flow) | Solder temperature: 260C for 10 sec | No deformation of case or excessive looseness of terminals. | |
| Resistance to Manual Soldering | Soldering iron temperature: 300C, Soldering time: 2 sec | No strength on contact. No deformation of case or excessive looseness of terminals. | |
| Solderability | Solder temperature: 230C for 3 sec insertion duration | Solder shall cover a minimum of 95% of the surface being immersed. | |
